Solvents
|
ECL Formula # |
Description |
Evaporation Rate |
Solvent Strength |
Flash Point |
Flow Time |
Set-up Time |
HAPS |
Photo-chemically reactive |
Characteristics |
|
V9776 |
Solvent Blend #1 |
5 |
7 |
28 |
3 |
3 |
yes |
yes |
Fast evaporator; suitable for lacquers & enamels |
|
V9910 |
Solvent Blend #2 |
9 |
6 |
38 |
6 |
6 |
yes |
yes |
Medium evaporator; suitable for urethanes |
|
W283 |
Solvent Blend #3 |
8 |
6 |
38 |
4 |
4 |
yes |
yes |
Medium evaporator; suitable for hi-solids and low solids urethanes, & enamels |
|
W7161 |
Solvent Blend #84 |
5 |
7 |
38 |
5 |
5 |
yes |
yes |
Intermediate fast evaporator suitable for hi-solids and low solids urethanes, & enamels |
|
R1200 |
Urachem Reducer |
9 |
8 |
30 |
7 |
7 |
yes |
yes |
Medium evaporator suitable for hi-solids and low solids urethanes |
|
W197 |
TI Slow Reducer |
20 |
9 |
81 |
9 |
9 |
yes |
yes |
Slow evaporator; suitable for urethanes; eliminate dry spray |
Evaporation Rate Measure of Time in minutes required for 90% to evaporate Solvent Strength Ratings express the ability to dissolve resin and reduce viscosity. Rated 1 10 (10 being best) Flash Point Temperature (F) at which sufficient vapors are given off to ignite by open flame (Closed Cup Method) Flow Time good flow permits paint film to level out to a smooth film of uniform thickness without orange peel. Rated from 1-10 (10 being Best) Set-up Time relative rating of time necessary to obtain surface or dry-free drying of film. Rated from 1-10 (10 being Best) HAPS ์yes๎ means contains solvents listed and regulated under the Federal EPA HAPS Rule ์No๎ means contains no HAPS solvents; see MSDS for specific HAPS content |
Copyright
(C) 2006 Eastern Chem-Lac
Polane T* and Polane T Plus* trademark Sherwin Williams Company