General Information                   Physical Properties                         Application

Lacthane is a solvent based             Physical and Chemical test were         Application Recommenda-

clear wood finish suitable for           done on pine wood panels cured        tions Conventional air pres-

all types of wood.                           for 14 days.                                       surized equipment is recom-

                                                                                                               mended.

As a modified lacquer poly-         1. Recommended usage:                       Apply a ìsealerî coat of

urethane, Lacthane will pro-            Clear wood finish for cabinets,           Lacthane reduced 1:1 su-

vide performance in high                  furniture, table tops or other              perior with T4-1 or for

humidity environments, such            ìhigh-usage areas.                              better sanding properties,

kitchens or bathrooms.                 2. Subsdtrates:                                     mix Lacthane 1:1 with 622

                                                          Wood                                           Sanding Sealer and reduce

Lacthane is offered in four            3. Method of Application:                     with T4-1.

(4) varieties of gloss:                           Spray                                           

                                                      4. Solids by Volume:                          Allow to dry before sanding

P3000    Flat                                      22%                                              approximately 30 minutes.

W3400   Satin                                5. Solids by Weight:                          

H2300   Semi-Gloss                           28%                                              Build successive coats with

H1200   Full Gloss                         6. Weight per Gallons:                       reduced Lacthane, allowing

                                                          7.5 lbs.                                          at least 30 minutes betwee

Lacthane is packaged in eithe       7. V.O.C. Content:                               coatings.

                                                           5.5 lbs per gallon                         

                                                      8. Hardness: Sward                           All finishing must be com-

                                                          Glass: 50                                       pleted in one day. Do not

                                                          Lacthane: 20                                  recoat Lacthane after 24 hrs

                                                      9. Adhesion:                                      it must be allowed to com-

                                                          Excellent                                        pletely cure for 10-14 days

                                                    10. Solvent Resistance:                        minimum depending on

                                                          Spot test till dried                           ambient room temperture.

                                                          Water: No effect                            It is advisable to test a small

                                                          Iso Alcohol: No effect                    area first, prior to recoating

                                                                                                               to make sure the initial

                                                                                                               coating is completly cured.

                                                      No effect is defined as no

                                                      staining, whitening, or                         All items to be recoated

                                                      softening of film.                                 with Lacthane must be well

                                                                                                               sanded in order to promote

                                                                                                               adhesion and prevent de-

                                                                                                               lamination.

CLEAN-UP- Use either Lacquer Thinner T4-1 or Washing Thinner 928.